Networking “Authorization supplicant failed”

[Grumpy]

getting little annoyoid on this one seen post to check the .nmconnection files and delte those and it has helped some since there was missing some key information on first time so wanted to check if i have same but seems like i can even check or delete those so what i am missing now
[wifi-security]
auth-alg=open
key-mgmt=wpa-psk
psk-flags=1

in the old one “auth-alg=open” was missing

 

[Grumpy]

missing EDIT option so adding the EDIT here

seems like i have sorted somehow or updates the issue on 2.4Ghz only since that wont disconnect or give issues anymore only maxed speeds are terrible but better have not maxed speeds and unstable connection. this seems to happend on now only 5Ghz connection when it is on it has 20% signal strenght still even router is next to me but speed are all maxed out and disconnects happends every hour or so

 

[nkukard]

which wifi hardware is it? can you get a snippet from lspci -nn and anything output in dmesg when the disconnects happen?

 

[Grumpy]

which wifi hardware is it? can you get a snippet from lspci -nn and anything output in dmesg when the disconnects happen?

Killer AX1650s that is the network card i have im now back to 2.4Ghz and 3 hours no single disconnect errors i switched on 5Ghz and got instant disconnect and auth error in 5 minutes this was 2 weeks on both networks, but something fixed one

lscpi -nn

0000:00:00.0 Host bridge [0600]: Intel Corporation 11th Gen Core Processor Host Bridge/DRAM Registers [8086:9a36] (rev 05)
0000:00:01.0 PCI bridge [0604]: Intel Corporation 11th Gen Core Processor PCIe Controller #1 [8086:9a01] (rev 05)
0000:00:02.0 VGA compatible controller [0300]: Intel Corporation TigerLake-H GT1 [UHD Graphics] [8086:9a60] (rev 01)
0000:00:04.0 Signal processing controller [1180]: Intel Corporation TigerLake-LP Dynamic Tuning Processor Participant [8086:9a03] (rev 05)
0000:00:07.0 PCI bridge [0604]: Intel Corporation Tiger Lake-H Thunderbolt 4 PCI Express Root Port #2 [8086:9a2f] (rev 05)
0000:00:07.3 PCI bridge [0604]: Intel Corporation Tiger Lake-H Thunderbolt 4 PCI Express Root Port #3 [8086:9a31] (rev 05)
0000:00:0a.0 Signal processing controller [1180]: Intel Corporation Tigerlake Telemetry Aggregator Driver [8086:9a0d] (rev 01)
0000:00:0d.0 USB controller [0c03]: Intel Corporation Tiger Lake-H Thunderbolt 4 USB Controller [8086:9a17] (rev 05)
0000:00:0d.3 USB controller [0c03]: Intel Corporation Tiger Lake-H Thunderbolt 4 NHI #1 [8086:9a21] (rev 05)
0000:00:0e.0 RAID bus controller [0104]: Intel Corporation Volume Management Device NVMe RAID Controller [8086:9a0b]
0000:00:12.0 Serial controller [0700]: Intel Corporation Tiger Lake-H Integrated Sensor Hub [8086:43fc] (rev 11)
0000:00:14.0 USB controller [0c03]: Intel Corporation Tiger Lake-H USB 3.2 Gen 2x1 xHCI Host Controller [8086:43ed] (rev 11)
0000:00:14.2 RAM memory [0500]: Intel Corporation Tiger Lake-H Shared SRAM [8086:43ef] (rev 11)
0000:00:14.3 Network controller [0280]: Intel Corporation Tiger Lake PCH CNVi WiFi [8086:43f0] (rev 11)
0000:00:15.0 Serial bus controller [0c80]: Intel Corporation Tiger Lake-H Serial IO I2C Controller #0 [8086:43e8] (rev 11)
0000:00:15.1 Serial bus controller [0c80]: Intel Corporation Tiger Lake-H Serial IO I2C Controller #1 [8086:43e9] (rev 11)
0000:00:16.0 Communication controller [0780]: Intel Corporation Tiger Lake-H Management Engine Interface [8086:43e0] (rev 11)
0000:00:1c.0 PCI bridge [0604]: Intel Corporation Device [8086:43be] (rev 11)
0000:00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:4389] (rev 11)
0000:00:1f.3 Audio device [0403]: Intel Corporation Tiger Lake-H HD Audio Controller [8086:43c8] (rev 11)
0000:00:1f.4 SMBus [0c05]: Intel Corporation Tiger Lake-H SMBus Controller [8086:43a3] (rev 11)
0000:00:1f.5 Serial bus controller [0c80]: Intel Corporation Tiger Lake-H SPI Controller [8086:43a4] (rev 11)
0000:01:00.0 3D controller [0302]: NVIDIA Corporation GA107M [GeForce RTX 3050 Ti Mobile] [10de:25a0] (rev a1)
0000:74:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5260 PCI Express Card Reader [10ec:5260] (rev 01)
10000:e0:01.0 System peripheral [0880]: Intel Corporation RST VMD Managed Controller [8086:09ab]
10000:e0:01.2 PCI bridge [0604]: Intel Corporation Device [8086:9a07] (rev 05)
10000:e1:00.0 Non-Volatile memory controller [0108]: SK hynix Gold P31/PC711 NVMe Solid State Drive [1c5c:174a]

more on pastebin
https://paste.linux.chat/?e79724130a068e4f#GNCVAkE2UJHj11MKuYd6P1GD1aMpEQwExoNsCsAiPP3j

 

[Grumpy]

i saw some interesting there, but waiting what you see if we see both same just example there is messages that kde extenssions dosent support example wifi 7 might be same on wifi 6 already since i am on wifi 6 AX card

 

[nkukard]

Can you provide the output of systemctl list-unit-files --state=enabled

 

[Grumpy]

UNIT FILE                          STATE   PRESET 
btrfsmaintenance-refresh.path      enabled enabled
ca-certificates.path               enabled enabled
cups.path                          enabled enabled
issue-generator.path               enabled enabled
smartd_generate_opts.path          enabled enabled
apparmor.service                   enabled enabled
appstream-sync-cache.service       enabled enabled
auditd.service                     enabled enabled
avahi-daemon.service               enabled enabled
bluetooth.service                  enabled disabled
cron.service                       enabled enabled
cups.service                       enabled enabled
display-manager.service            enabled enabled
firewalld.service                  enabled disabled
getty@.service                     enabled enabled
irqbalance.service                 enabled enabled
issue-generator.service            enabled enabled
kbdsettings.service                enabled enabled
lvm2-monitor.service               enabled enabled
mcelog.service                     enabled enabled
ModemManager.service               enabled enabled
NetworkManager-dispatcher.service  enabled disabled
NetworkManager-wait-online.service enabled disabled
NetworkManager.service             enabled disabled
nscd.service                       enabled enabled
nvidia-hibernate.service           enabled disabled
nvidia-resume.service              enabled disabled
nvidia-suspend.service             enabled disabled
nvmefc-boot-connections.service    enabled enabled
postfix.service                    enabled enabled
purge-kernels.service              enabled enabled
smartd.service                     enabled enabled
sshd.service                       enabled disabled
systemd-pstore.service             enabled enabled
YaST2-Firstboot.service            enabled enabled
YaST2-Second-Stage.service         enabled enabled
avahi-daemon.socket                enabled disabled
cups.socket                        enabled enabled
dm-event.socket                    enabled enabled
lvm2-lvmpolld.socket               enabled enabled
lines 1-41

Can you provide the output of systemctl list-unit-files --state=enabled

 

[nkukard]

This line is curious ...

[ 9030.958318] wlp0s20f3: deauthenticating from a8:25:eb:27:a3:42 by local choice (Reason: 3=DEAUTH_LEAVING)

Typically means something on the machine is requesting leaving the AP, most common cause would of been wpa_supplicant running as a service, as its started by and managed by NM automatically.

Only other thing I could recommend is stopping NM and running wpa_supplicant manually and requesting an IP with dhcpcd manually and see if you still get disconnects.

 

[Grumpy]

yeah thats why i wanted to acces .nmconnection files to see what is difrence why 2.4ghz on same network works, but 5ghz now only gets disconnects auth error

 

[nkukard]

yeah thats why i wanted to acces .nmconnection files to see what is difrence why 2.4ghz on same network works, but 5ghz now only gets disconnects auth error

Oh, that is even more interesting, you only get dc'd with 5ghz?

 

[Grumpy]

Oh, that is even more interesting, you only get dc'd with 5ghz?

yes this week my networks has been stable and i was like how why even games my ping/latency didint get high as it did when gets disconnects so i saw im using on 2.4Ghz usually i am on 5Ghz since speeds are so much better and no disconnects at all on 2.4 channel went to 5ghz to test signal strength dropped 85% to 10% and first disconnect after 5 minuters using 5ghz channel

 

[Grumpy]

so i need to find some app/software that can read .nmconnection file it is locked files and state is unknown so i bet there is something to answer this mystery since it is files on networks i use 1 network 2.4Ghz connection details and 5Ghz connection details

 

[nkukard]

I doubt that's the problem.

Could you try disabling power saving for the wifi adapter to see if that would make any difference... /etc/NetworkManager/conf.d/wifi-powersave-off.conf

[connection]
# Values are 0 (use default), 1 (ignore/don't touch), 2 (disable) or 3 (enable).
wifi.powersave = 2

Save, reboot & test again.

 

[Grumpy]

that might be issue i dont have conf files there the folder is fully empty not even hidden files

 

[Grumpy]

i have there conf.d that is empty, dispatcher.d, system-connections that has the wifi connection files and vpn

 

[nkukard]

that might be issue i dont have conf files there the folder is fully empty not even hidden files

Yea, its normally empty. The fact there is a delay to the disconnects and it appears to be initiated by something, power saving may be the culprit.

If that fails to give better results, I'd check the firmware is up to date next.

There is a bunch of reports for that card, but mostly for 5.x kernels.

 

[Grumpy]

i will test and make the config to disable powersafe mode

 

[Grumpy]

well it made websites slow it took 30s or more to refresh forums etc so thats not the case, but i see now how to check the files i had to use filemanger or terminal as super user not just user with sudo permissions, but both networks has all as it should now atleast and havent yet disconnected. i might need to make some script or conf that uses 5Ghz as default as primary and fall back is 2.4ghz it would be so nice to get that killer software it has all that build in even switches radio to not so traffic ones

wifi-security]
auth-alg=open
key-mgmt=wpa-psk
leap-password-flags=1
psk-flags=1
wep-key-flags=1

[ipv4]
method=auto

[ipv6]
addr-gen-mode=default
method=auto

 

[Grumpy]

[connection]
# Values are 0 (use default), 1 (ignore/don't touch), 2 (disable) or 3 (enable).
wifi.powersave = 2

this might done it it actually might fixed the issues if it was all the time power related issue and disconnects happends on some error and then forces to reload connection. uptime 1 hour no issues yet will keep in posted. i mean i made .conf file restarted it made something since everyhting worked more and then delted conf file and now no disconnects yet

 

[Grumpy]

i could say this has been fixed 6 hours uptime not single error or disconnects anymore